{"product_id":"2000w-3-in-1-handheld-laser-welding-machine-eh20l-mm01","title":"HEROLASER eH20L-MM01 2000W 3-in-1 Handheld Laser Welding Machine","description":"\u003ch2 dir=\"ltr\"\u003eOverview\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003eThe HEROLASER eH20L-MM01 is a 2000W air-cooled handheld laser welding system with automatic wire feeding. The air-cooled design eliminates the external chiller required by comparable water-cooled machines, cutting both the footprint and the energy draw.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eAt 2000W it sits at the upper end of handheld laser welding, with the power to handle thicker material and faster travel speeds than lower-wattage systems. A 14 μm energy transmission fiber delivers a tightly controlled beam, producing welds without marking or discoloration on the surrounding surface.\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003eKey Features\u003c\/h2\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e2000W laser power for thicker material and faster welding\u003c\/li\u003e\n\u003cli\u003eAir-cooled system, no external chiller required\u003c\/li\u003e\n\u003cli\u003eReduced energy consumption compared to water-cooled systems\u003c\/li\u003e\n\u003cli\u003e14 μm energy transmission fiber for high weld quality\u003c\/li\u003e\n\u003cli\u003eWelds without surface marking or discoloration\u003c\/li\u003e\n\u003cli\u003eMulti-angle nozzles for precise welding on varied joint geometry\u003c\/li\u003e\n\u003cli\u003eAutomatic wire feeding\u003c\/li\u003e\n\u003cli\u003eSafety circuit protects against accidental leakage\u003c\/li\u003e\n\u003cli\u003e3 meter fiber length for working reach\u003c\/li\u003e\n\u003cli\u003eCompact, portable handheld format\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003eApplications\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003eIdeal for:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eProduction fabrication and metalwork\u003c\/li\u003e\n\u003cli\u003eStainless steel welding including railings, cabinets, and enclosures\u003c\/li\u003e\n\u003cli\u003eThicker material where lower-wattage systems reach their limit\u003c\/li\u003e\n\u003cli\u003eWork where finish appearance matters and discoloration is unacceptable\u003c\/li\u003e\n\u003cli\u003eIndustrial maintenance and repair\u003c\/li\u003e\n\u003cli\u003eShops without space for a chiller installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003ePerformance \u0026amp; Functionality\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003ePower is the practical difference at 2000W. Higher laser power means faster travel speed on the same material and the ability to weld thicker sections than 700W or 1000W systems can handle. For a shop running production volume rather than occasional work, that translates directly into throughput.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe 14 μm energy transmission fiber concentrates the beam tightly, which is what produces a weld without heat spreading into the surrounding surface. On stainless in particular this means no discoloration to clean up and no marking around the joint, so parts move to finishing rather than to a grinder.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eMulti-angle nozzles let the head reach joints that a fixed-angle nozzle cannot approach cleanly, which matters on corners, internal angles, and assemblies with limited access.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eAir cooling removes the chiller entirely. No coolant maintenance, no plumbing, no fixed footprint, and lower energy consumption than an equivalent water-cooled setup.\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003eInstallation \u0026amp; Operation\u003c\/h2\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eHandheld portable format\u003c\/li\u003e\n\u003cli\u003eAir cooled, no external chiller or water supply required\u003c\/li\u003e\n\u003cli\u003eAutomatic wire feeding integrated\u003c\/li\u003e\n\u003cli\u003e3 meter fiber length\u003c\/li\u003e\n\u003cli\u003ePower requirement: AC 220V 50Hz\u003c\/li\u003e\n\u003cli\u003eSafety circuit included\u003c\/li\u003e\n\u003cli\u003eOperator eye protection required during use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003eSpecifications\u003c\/h2\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eLaser Power: 2000W\u003c\/li\u003e\n\u003cli\u003eWavelength: 1080 nm ± 10 nm\u003c\/li\u003e\n\u003cli\u003eCooling: Air cooled\u003c\/li\u003e\n\u003cli\u003eFiber: 14 μm energy transmission\u003c\/li\u003e\n\u003cli\u003eFiber Length: 3 meters\u003c\/li\u003e\n\u003cli\u003eWire Feeding: Automatic\u003c\/li\u003e\n\u003cli\u003ePower Supply: AC 220V 50Hz\u003c\/li\u003e\n\u003cli\u003eNozzles: Multi-angle\u003c\/li\u003e\n\u003cli\u003eFormat: Portable handheld\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003eWhy Choose the eH20L-MM01?\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003eHandheld laser welding at 2000W is normally water cooled, which means a chiller, coolant maintenance, and a permanent spot on the shop floor. The eH20L-MM01 delivers that power level without any of it.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eFor a shop that has outgrown lower-wattage systems and needs to weld thicker material or move faster through production volume, this is the step up. The 14 μm fiber and multi-angle nozzles mean the increase in power does not come at the cost of weld appearance or joint access.\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003eSupport\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003eContact our team for application guidance, material and thickness recommendations, and a delivered quote.\u003c\/p\u003e","brand":"HEROLASER","offers":[{"title":"2000W","offer_id":49206838067419,"sku":"HLAILW2000W","price":7999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/4683\/6187\/files\/615ilAZjRuL._AC_SL1500_ab234717-cdb1-49c5-966a-d7a12805ebcb.jpg?v=1788228367","url":"https:\/\/garagelabco.com\/products\/2000w-3-in-1-handheld-laser-welding-machine-eh20l-mm01","provider":"Garage Lab Co","version":"1.0","type":"link"}